Air Cooled Servo Voltage Stabilizer
Technical Specification :
Technical Specification :
Single Phase Servo Voltage Stablizer
Rating
5 KVA to 350 KVA
Input Voltage Range
As Per customer Requirement or custom built
Over-Load Capability
Up to 150 % momentarily
Output Voltage
Standard 220 / 230 / 240 Volts. or as per customer requirement
Line & Load Regulation
0.5 % or 1%
Duty Cycle
Continuous 24 X 7
Wave Form Distortion
Nil true to input
Response Time
Less than 10 m
Correction of Speed
8v to 70V per sec. ( Depend on Input Voltage range & capacity)
Correction Method
Step-Less correction using Auto Variable Transformer
Suitability
Suitable for all power factor loads
Cooling
Natural Air Cooled / Forced Air Cooled.
Class of Insulation
Available in E / B /F Class
Break Down Strength & I R
2500V AC for 2 Minutes. Greater than 50 Mega Ohms at 500V DC
No Load Loss
Less than 0.4 %
Efficiency
97 % to 99% ( Depend on Input Voltage range & capacity)
Ambient Temperature
Wide ambient temperature operation from –20° C to 45° C
Winding & Wiring Material
E C grade ( 99.999% Pure)
Switchgears
Reputed Make
Input / Output Termination
Connectors / Bus Bar
Installation
Indoor & Out door type
Degree of Protection
IP - 30 to IP - 55
Optional Features and Protections
- Overload Cut-Off and Short Circuit Protection.
- Low / High Voltage (out of input range) Alarm and / or Cut-Off.
- High Temperature Alarm and / or Cut-Off.
- Spike and surge protection
- Ammeter, Temperature Meter, Voltmeter.
- Stabilizer By Pass System
- Remote control of stabilizer ( with wires )
